ComGroup Australia - Communication - Systems - Solutions
 
Base Station/Repeater
The Simoco Base Station family is a group of microprocessor controlled, fully synthesized, frequency modulated, VHF and UHF Base Stations bringing you reliable, flexible and cost effective infrastructure equipment.

Tower

Repeater
Base Station
TRB9200/VoIP TSF2000 Eclipse (PRF28)    
TRB9200

TRB9200/VoIP Base Station Transceiver
A high performance, state of the art base station transceiver intended for use with private mobile radio systems.

The base is ideally suited for use in VHF or UHF two-way voice radio systems. The TRB9200 series can perform in a range of applications including trunking, voting, quasi-sync, radio data modem and paging. The Receiver, Exciter and Power Amplifier are contained in shielded aluminium modules and can be easily removed from the main chassis.

The flexibility of the TRB9200 series allows it to be configured for a wide range of applications.


TRB9200/VoIP applications include:

• Conventional 2-Way voice base station
• Full duplex or simplex base station
• Radio modem base station
• High speed data transceiver
• Trunking base station for MPT1327, LTR, SmartTrunk and others
• POCSAG paging transmitter to 2400 BPS
• DC-coupled Direct FSK modulation system
• VoIP
• Wide band data repeater
• DC-coupled repeater
• Point to point link
• Fast 25mS multi hopped repeater
View brochure (PDF)
TRB brochure
TSF2000 Base Station


TSF2000 Base Station Repeater

The TSF2000 Series is the world's most advanced range of Base Stations for Analogue Communications Systems, manufactured in a super slim 1RU 19” chassis.

The TSF2025 and 2100 are slim-line, cost-effective, high performance Base Stations for the 21st century with IP ready interfaces and comprehensive remote control facilities.

The TSF2000 series is based on the technology used in the well proven and popular SRM9000 Series of VHF and UHF Transceivers. These products are Digital Signal Processors (DSP) controlled, fully synthesized, frequency modulated, VHF/UHF Radios.

The TSF2000 series provides plug in replacement to many other manufacturer's Base Stations through the use of highly configurable I/O connectors and programming parameters.

Standard TSF2000 applications include:
High Performance in 1U height, 19” base stations, TSF2025:
1 – 25W cont, and TSF2100: 25-100W cont.
High environmental specification (-25C to +55C)
Transmit Duty Cycle 100%, Full Duplex
Modular construction for low MTTR
Rack or wall mounted
Microsoft Windows based Programming Tool
DSP controlled, fully programmable
Eight key PMR frequency bands covered (66-530MHZ)
Completely compatible with SRM9000 series of Mobile Radios
In-built loud speaker for audio monitoring
37-way Facilities socket with programmable pin functions
2 x 2/4 – wire line connect (x2)
Dual-redundant, speed controlled fans with remote alarms
Line Signaling, Voting Tones, RSSI
Local Encode/Decode of CTCSS, DCS Selcall tones (decode only)
Transmission Timers
View brochure (PDF)
TSF brochure

PRF28Base Station Repeater

View brochure (PDF)

View PDF


Eclipse Base Station Repeater
(formely known as PRF28)
The Eclipse Series is a family of microprocessor controlled, fully synthesized, frequency modulated VHF and UHF Base Stations. The Eclipse has a special interface for easy connection to SIMOCO Products and delivers exceptional systems performance in diverse and exacting applications due to its superior RF and environmental specifications.

Standard applications include:
Standard Variants for all applications
100 channel Capacity
Microprocessor controlled, fully programmable
Comprehensive control facilities

Easily configured for Duplex, Simplex, Trunked or
Linked applications
Easy customisation with synthesised design
Rugged and Modular construction
12V float charge battery system
 
Copyright ComGroup, 2006About usSite mapChinese languauge websiteSimoco web page